Rapid Antigen Test Kit SARS-CoV-2 Antigen Self Testing 5 Tests High Specificity Antigen Rapid Test Kit
Intend Use
This rapid test kit is intended for the qualitative detection of SARS-CoV-2 viral nucleocapsid antigens from human anterior nasal of secretion. Testing result of the antigen test can be used for early isolation of patients with suspected infection, but it cannot be used as diagnosis basis of SARS-CoV-2 infection. Further nucleic acid detection should be carried out for suspected population whose antigen test result is positive or negative.
Product Details
| Item | Value |
| Model Number | LX-401305 |
| Package | 5 Tests/Kit |
| Warranty | 24 Months |
| Quality Certification | CE, MSDS |
| Safty Standard | ISO13485 |
| Sample Type | Nasal Swab |
| Sample volume | 3 Full drops |
| Test Speed | Within 15 minutes |
| Specificity | 100.00% |
| Sensitivity | 97.45% |
Product Feature
- Accurate: With ultra-high sensitivity and specificity.
- Easy: Easy to operate, No other equipment is required. Results can be read by naked eyes.
- Rapid: The sample can be detected on site, and thetest results can be obtained in 15 minutes
- Convenient: Stored at room temperature. All required accessories are provided in the test kit
- Lower cost with high efficiency
Advantage
- Fast results as soon as 10-15 minutes
- Facilitates patient treatment decisions quickly
- Simple, time-saving procedure
- Little specimens, only few Nasal swabs
- All necessary reagents provided and no equipment needed
- High sensitivity and specificity
Main Components
- Test Cassettes
- Sample tubes
- Extraction Buffer
- Swabs
- Tube stand
- Instruction for use
TEST PREPARATION
Let test cassette and test components stand at a room temperature (15℃ to 27℃) before performing the test.
Lay all the supplied materials on a clean, dry and flat surface.
Use Step
- Open the sealed pouch and remove the test casstette. Lay it face up on a clean, dry and flat surface.
- Unpack the sample extraction, add all of the sample extraction into the sample tube and then put the tube into tube stand.
- Gently, insert the entire absorbent tip of the swab (around 1.5 cm) into your nostril. Rotate walls of your nostril 5 times or more. Use the same swab to repeat steps in the other nostril.
- Insert the swab into the ssample tube with extraction buffer. Mix well. Mix well and squeeze the swab 10-15 times by compressing the walls of the tube against the swab. Roll the swab head against the inner wall of the tubes as you remove it.
- Close the cape of the sample tube. Add 3 full drops of the mixed solution vertically into the sample well(S) of the test cassette.
- Read the result 15-20minutes after adding the sample. Result got after 20 minutes is invalid.
Result Interpretation
-
POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).
-
NEGATIVE: Only one colored band appears, in the control region (C). No apparent colored band appears in the test region (T).
-
INVALID: If there is no Control line (C) or only a Test line (T) in the result window, the test did not run correctly and the results are not valid.
Virus Sources
| Global high frequency mutation | Alpha / B.1.1.7(U.K.) | Beta I B.1.351(South Africa) |
| Gemma I P.1(Brazil) | Kappa I B.1.617.1(India) | Delta I B.1.617.2(India) |
| C.37,ect | Alpha I B.1.17(U.K.) | B.1.36.16.etc |
| A.2.5,etc | A.23.1 | Alpha I B.1.17(U.K.) |
| B.1.1.33.etc | C.1.1.etc. | |
Other Information
- DISPOSAL The test kit can be disposed of with normal household waste in accordance with applicable local regulations.
- A negative result does not rule out the infection of a SARS-CoV-2 infection. Therefore, the test should not be used as the only reference for the clinical diagnosis. The result must be confirmed by the PCR.
- The test is not validated on specimens from pregnant women.
- After use, rinse hands or, in case of contact with the buffer solution, the affected body parts thoroughly with water.
n
FAQ
Stock 3-7 days in general. Or please contact us by email for specific lead time base on your order quantities.
- How does your factory do regarding quality control?
Quality is priority. We attach great importance to quality control from the very beginning to the end. All raw material we used are non-toxic, environmental-friendly. We have a stric professional QA/QC team to ensure the quality.
- Do you accept OEM or ODM order?
Yes, we accept both OEM and ODM for customers.
- What are your terms of delivery?
We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
TT, DP, DA, etc
Certificate
Product Tags:
|
|
SARS-CoV-2 Antigen Rapid Test Kit SARS-CoV-2 Antigen Self Test Kit With 5 Tests Images
|
